[+]

TrojanUV3000B - Simple, Reliable & Operator-Friendly UV Systems

Designed for small wastewater treatment plants that require a simple in-channel disinfection solution without chemicals.

Simple, Operator-Friendly Wastewater Disinfection Solution

The TrojanUV3000™B is straightforward to use and requires minimal operator involvement, thanks to modular design and robust components.

The system uses environmentally friendly ultraviolet (UV) light. No disinfection by-products are created and no chlorine compounds are transported, stored or handled by plant staff.

Proven Performance, Components & Design

The system has been validated through regulatory-endorsed bioassay testing and installed in almost 1,000 installations worldwide. Performance data is generated from actual field testing (bioassay validation) over a range of flow rates, effluent qualities and UVTs - providing confidence in the system design.

Outdoor Installation Flexibility

All components can be installed outdoors, eliminating the need and costs of a building, shelter and air conditioning for ballast cooling.

Well Suited to Changing Regulations

Our systems do not have any negative impact on receiving waters, making them a strategically sound choice for long-term treatment as regulations continue to become increasingly stringent.

Request a Parts Quote

Common replacement parts for the TrojanUV3000B:

Lamps

  • # 302417, # 302418
Quartz Sleeves
  • # 302108, # 302208

Lamp Drivers (Ballast)

  • # 302403

Advanced, Self-Contained UV Modules
Space-saving, electronic ballasts are housed right in the modules, not in separate external cabinets. This minimizes the footprint of the UV system and eliminates the need for air-conditioning. In fact, the ballasts are cooled by convection, thereby reducing O&M costs. Each UV module features a UV lamp status indicator for at-a-glance confirmation that all lamps are operating.
 
Proven Performance, Components and Design
The TrojanUV3000B system has been validated through regulatory-endorsed bioassay testing and installed in over 1000 installations worldwide. Performance data is generated from actual field testing (bioassay validation) over a range of flow rates, effluent qualities and UVTs - providing confidence in the system design. This modular system is scalable and can be installed outdoors to reduce installation costs.
 
Flow Pacing Reduces O&M Costs
The System Control Center allows the TrojanUV3000B to be flow paced – meaning the UV lamps of individual banks are turned on and off automatically in response to variations in flow rate (based on a flow meter signal). Flow pacing maximizes operating efficiency by matching UV output to disinfection requirements, and reducing electrical consumption during periods of low flow by turning lamps off.
System Characteristics
Typical Applications 
  • 1 – 5 MGD (158 – 789 m3/hr)
Lamp Type 
  • Low-pressure
Ballast Type 
  • Electronic; non-variable
Input Power Per Lamp
  • 87.5 Watts
Lamp Configuration 
  • Horizontal, parallel to flow
Module Configuration
  • 4, 6 or 8 lamps per module
Bank Configuration 
  • Up to 20 modules per bank
Channel Configurations
Lamp Banks in Series
  • Up to 3
Channel Options
  • Concrete (by others)
Level Control Device Options
  • Automatic Level Controller or fixed weir
Enclosure Ratings
System Monitor/Control Center
  • 304 stainless steel
Ballast Enclosure
  • TYPE 6P (IP67)
Ballast Cooling Method
  • Convection; no air conditioning or forced air required
Installation Location
  • Indoor or outdoor
System Monitoring & Controls
Controller 
  • Monitoring and bank control
UV Intensity Monitoring
  • Optional
Flow Pacing
  • Optional
Inputs Required
  • 4-20 mA flow signal for Flow Pacing
  • Local Status Indication 
  • Lamp Age (hours)
  • UV Intensity (mW/cm2)
  • Bank Status (on/off)
  • Low Intensity Alarm
  • Lamp Failure Alarm
Remote Alarms 
  • UV Intensity (4-20 mA)
  • Common Alarm (discrete)
Electrical Requirements
Power Distribution 
  • Power Distribution Centre
Quantity Required 
  • 1 PDC per bank
Power Input 
  • 120V, single phase
  • 208V, 3-phase
  • 240V, single phase
  • Secondary & Tertiary Effluent UV Disinfection

    The vast majority of wastewater treatment plants around the world provide secondary treatment through conventional activated sludge processes. Some plants have tertiary treatment processes that use an additional filtration process to further improve water quality. The resulting effluent typically requires a disinfection step before discharge back to the environment.

    More

  • Chlorine Conversion to UV Disinfection

    Chlorine gas has traditionally been used for wastewater disinfection for many years. Sodium hypochlorite (liquid bleach) is an alternative to chlorine gas; however, it is more costly and has the same environmental concerns. UV disinfection can easily be retrofitted into an existing chlorine contact tank and has significant benefits compared to chlorine disinfection.

    More

Request a Quote

Contact Us

3020 Gore Road, London, Ontario Canada, N5V 4T7
Office:
+1 (519) 457-3400
Office:
+1 (888) 220-6118
Fax:
+1 (519) 457-3030

Email Us

Cookies are important to the proper functioning of a website. To improve your experience, we use cookies to remember log-in details and provide secure log-in, collect statistics to optimize site functionality, and deliver content tailored to your interests. Click Accept to accept cookies and continue browsing the TrojanUV website. If you decline an essential cookie will be used to remember your preference not to be tracked. Accept Decline