TrojanUVFlex for Wastewater
Utilizing revolutionary Solo Lamp™ Technology, the TrojanUVFlex™ provides energy-efficient UV disinfection for modern wastewater reuse challenges.
Offering the latest advancements in system controls to optimize performance, operating costs, and reporting, the TrojanUVFlex™ can help meet the stringent disinfection requirements demanded of treatment facilities distributing reclaimed wastewater.
Suited for Advanced Wastewater Treatment Around the World
The TrojanUVFlex™ allows for flexible design options to encourage wastewater reuse providers to design for worst-case performance conditions but also operate efficiently in real-time by minimizing lamp use and power.
Third-party validation done in accordance with both the USEPA Ultraviolet Disinfection Guidance Manual (UVDGM) and the 2012 National Water Reuse Institute (NWRI) Ultraviolet Disinfection Guidelines for Drinking Water and Water Reuse standards ensures that a UV system can be designed to deliver chemical-free disinfection for regional treatment challenges.
Efficient Operation & Easy Maintenance, With a Compact Footprint
Powerful and highly energy-efficient Solo Lamps lead to a low lamp count which, in turn, provides other benefits such as fewer associated components (e.g., lamp drivers and sleeves), and a smaller UV chamber, reducing footprint by up to 50% that of other low-pressure UV disinfection systems.
Lamps are installed perpendicular to flow allowing for individual sub-sections of lamps in a chamber to be turned on and off without causing “dead-zones”. This minimizes the number of lamps needed for treatment at a given time.
Advanced Solo Lamp drivers can also reduce (“dim”) each UV lamp’s output to 30% of its maximum output capability. These features maximize the range of UV-intensity outputs for a TrojanUVFlex™ system and provides end-users with dynamic and energy-efficiency UV disinfection for any treatment condition.
Common Replacement Parts for the TrojanUVFlex™
- # 908081-005, # 908081-007
- # 822639, # 822518
Lamp Drivers (Ballast)
- # 916841
- # 705038
Low Lamp Count & High Electrical Efficiency
The revolutionary TrojanUV Solo Lamp™ combines the benefits of low- and medium-pressure lamps, providing low power consumption (1/3 the energy of medium-pressure lamps), low lamp count, long lamp life (>15,000 hours), and reduced maintenance.
Optimized Power Consumption
Banks of lamps are turned on/off based on UV demand. The advanced Solo Lamp™ driver enables lamp dimming from 100 to 30% power and has built-in diagnostic capability for easy troubleshooting.
Compact Footprint & Flexible Installation
The small chamber footprint simplifies indoor retrofit installations and reduces construction costs. Chambers can be installed either horizontally or vertically, making integration into existing piping straightforward and allowing service access from any direction.
Less Time Spent Changing Lamps
Fewer lamps, long lamp life and easy change-outs save time and money.
Proven Disinfection Performance
Staggard, cross-flow lamp array – optimized through computational fluid dynamics – maximizes disinfection performance and increases system resilience with continued disinfection in the event of a lamp failure.
Mechanical Sleeve Cleaning
Without removing equipment or disrupting disinfection, the automatic sleeve wiping saves time and ensures the maximum UV output is available for disinfection.
Chambers can be manufactured with additional banks to accommodate future treatment capacity or advanced oxidation capability Providing a solution that meets current requirements while planning for future needs.
UV chambers are validated across a wide range of conditions in accordance with the National Water Research Institute (NWRI) and United States Environmental Protection Agency's Ultraviolet Disinfection Guidance Manual (UVDGM) for inactivation of Cryptosporidium, Giardia, viruses, and other pathogens. Ideal for high-intensity UV applications including wastewater reuse and 4-log virus treatment.
- TrojanUV Solo Lamp™ (low-pressure high-output)
- 500 Watts
- 1000 Watts
- Electronic, variable power (30% to 100%)
- 2205 duplex stainless steel
- 48-inch AWWA C207, DN1200
- 36-inch AWWA C207, DN900
- Up to 150 psi (PN10)
- Optional mechanical wiping
- AB Ethernet I/P
- Modbus TCP/IP
- Modbus RTU RS485
- Painted mild steel
- 304 stainless steel
- 316 stainless steel
Water Reuse with Ultraviolet DisinfectionThe advanced treatment and reuse of wastewater is becoming increasingly common as municipalities address high water demands and shrinking supplies. Australia, Spain, Italy, California and Florida, to name a few, must balance increasing population growth, dry climates and heavy irrigation/agricultural demands.
Secondary & Tertiary Effluent UV DisinfectionThe vast majority of wastewater treatment plants around the world provide secondary treatment through conventional activated sludge processes. Some plants have tertiary treatment processes that use an additional filtration process to further improve water quality. The resulting effluent typically requires a disinfection step before discharge back to the environment.
Request a Quote
Contact Us3020 Gore Road, London, Ontario Canada, N5V 4T7
- +1 (519) 457-3400
- +1 (888) 220-6118
- +1 (519) 457-3030