Chlorine is not the only viable disinfection option. With the TrojanUVSigna, you can confidently choose UV and benefit from its inherent safety features, cost-saving advantages and disinfection performance.
Ideal for Primary, Secondary and Reuse Applications
UV is the most effective, safe and environmentally friendly way to disinfect wastewater. It provides broad spectrum protection against a wide range of pathogens, including bacteria, viruses and chlorine-resistant protozoa such as Cryptosporidium and Giardia.The TrojanUVSigna™ incorporates innovations, including TrojanUV Solo Lamp™ Technology, to reduce the total cost of ownership and drastically simplify operation and maintenance. It's the ideal solution for treatment plants in need of revolutionary UV technology. Note that TrojanUVSigna banks are available in two-row, four-row and six-row lamp configurations.
Chlorine Conversion Made EasyTrojanUVSigna can be installed in an existing chlorine contact tank without major modifications to the channel depth or width. Gone are the days of time-consuming installations requiring new concrete walls with tight tolerances or stepped floors.
TrojanUVSigna Video Overview
- # 908081-003
- # 336268-2672
- # 916841
Features and Benefits Details
Water Level Management - Light Lock FeatureWater level management in open-channel UV systems is a key design consideration. For maximum disinfection efficiency and safety, it's important that UV lamps remain submerged while operating and that the water depth above the top of lamp is within tolerance.
With the TrojanUVSigna, the channel water level is managed using light locks in combination with the downstream water level controller. Light locks eliminate the need for complex channel designs.
Light Locks Overview Video
What Our Customers Are Saying
Full Scale Pilot TrailerInterested in finding out if the TrojanUVSigna will work for you? A full mobile pilot trailer is available for wastewater treatment plants that want to test the TrojanUVSigna with their effluent.
TrojanUVSigna™ incorporates innovations, including TrojanUV Solo Lamp™ Technology, to reduce the total cost of ownership and drastically simplify operation and...
TrojanUV Solo Lamp™ Technology combines the best features of low- and and medium-pressure lamps. The result: low power consumption, low lamp count, low carbon footprint,...
The Metropolitan Water Reclamation District of Greater Chicago (MWRD) – of which the Terrence J. O’Brien Water Reclamation Plant (WRP) is part of – has made a...
Water Resource Recovery Facility Replaces its Aging UV System - Murfreesboro, Tennessee (Case Study)
The City of Murfreesboro is located approximately 30 miles from Nashville. It is home to Middle Tennessee State University – the largest undergraduate university in the state...
By upgrading to a new TrojanUV system for their wastewater treatment plant, the Honouliuli Water Recycling Facility in Hawaii will see significant energy savings (as power consumption...
In order to improve the treatment performance (because of the continued cost to maintain compliance), and ensure that it would eventually have the treatment capacity to meet future...
The city of Auburn, AL has two wastewater treatment facilities – the Northside Water Pollution Control Facility and the H.C. Morgan Water Pollution Control Facility. In 2012,...
Low Lamp Count and High Electrical Efficiency
The 1000 Watt TrojanUV Solo Lamp™ combines the best features of low- and medium-pressure lamps.
Modular & Compact
UV banks are available in two-row, four-row and six-row lamp configurations, thus accommodating various channel depths.
Optimized Power Consumption
Banks are turned on/off based on UV demand. The advanced Solo Lamp Driver enables lamp dimming from 100 to 30% power and has built-in diagnostic capabilities for easy troubleshooting.
Simple Water Level Control
Light locks at each bank enable high tolerance to fluctuations in flow rates and water levels, simplifying water level control while maximizing disinfection.
Lamp change-outs and cleaning solution replacement are done while the UV bank is in the channel. And, thanks to the modular Power Distribution Center (PDC), components for one bank are isolated and can be safely accessed while other banks remain energized and disinfecting.
Less Time Spent Changing Lamps
Fewer lamps, long lamp life and easy change-outs save time and money.
Chemical and Mechanical Sleeve Cleaning
Without removing equipment or disrupting disinfection, the dual-action ActiClean™ system provides superior, automatic sleeve cleaning to prevent fouling.
Easy Bank Removal
Routine maintenance can be performed while banks are in the channel, but an Automatic Raising Mechanism (ARM) makes other tasks – such as winterization – simple, safe and easy.
Stringent tolerances on concrete channel walls are not required, making chlorine contact tank and UV channel retrofits simple and cost-effective. Retrofits can accommodate existing water level profile and head loss.
- TrojanUV Solo Lamp™ (amalgam)
Lamp DriverSleeve Cleaning System
Input Power Per Lamp
- Electronic, high-efficiency (99% power factor)
- 1000 Watts
- Staggered, inclined array (two-row, four-row or six-row)
- Type 6P (IP68)
- Type 4X (IP56)
UV Intensity Sensor
- 30 - 100% variable lamp power (1% increments)
Bank Lifting Device
- 1 per bank - with automatic cleaning
Level Control Device
- 1 per bank - Automatic Raising Mechanism (ARM)
Water Level Sensor
- Fixed or motorized weir gate
- High and low water level sensors available (one per channel)
ActiClean™ Cleaning System
- Dual-action; chemical/mechanical; programmable for automated cleaning at defined interval; manual override
Water Reuse with Ultraviolet DisinfectionThe advanced treatment and reuse of wastewater is becoming increasingly common as municipalities address high water demands and shrinking supplies. Australia, Spain, Italy, California and Florida, to name a few, must balance increasing population growth, dry climates and heavy irrigation/agricultural demands.
Secondary & Tertiary Effluent UV DisinfectionThe vast majority of wastewater treatment plants around the world provide secondary treatment through conventional activated sludge processes. Some plants have tertiary treatment processes that use an additional filtration process to further improve water quality. The resulting effluent typically requires a disinfection step before discharge back to the environment.
Low Quality Water Ultraviolet DisinfectionUV disinfection has been proven effective in challenging applications such as combined sewer overflows (CSO), storm and sanitary sewer overflows (SSO), blended effluents as well as disinfection of primary-treated wastewater.
Chlorine Conversion to UV DisinfectionChlorine gas has traditionally been used for wastewater disinfection for many years. Sodium hypochlorite (liquid bleach) is an alternative to chlorine gas; however, it is more costly and has the same environmental concerns. UV disinfection can easily be retrofitted into an existing chlorine contact tank and has significant benefits compared to chlorine disinfection.
Request a Quote
Powered by High-Effi... The 1000W TrojanUV Solo Lamp™ combines the best features...
Mobile Pilot Trailer... A mobile pilot trailer is available for wastewater treatment plants...
Easy Lamp Replacemen... The TrojanUVSigna™ lamps can be replaced while the...
Easy Maintenance wit... As seen in this 34.2 MGD (5,394 m3 hr) installation, the TrojanUVSigna™ can...
Contact Us3020 Gore Road, London, Ontario Canada, N5V 4T7
- +1 (519) 457-3400
- +1 (888) 220-6118
- +1 (519) 457-3030